Detailed Switch Specs PDF »

GOLDTECH PS160 SWITCH SERIES

SENSING PRESSURE | VACUUM | DIFFERENTIAL PRESSURE

The rugged yet ultra-sensitive Goldtech™ GT160 (and GT100) high-current pressure switch features a larger diameter diaphragm and incorporates a conventional snap action switch element. This design assures reliable performance under harsh and adverse conditions, while remaining low in relative cost. Choose from a wide variety of Goldtech pressure switch, vacuum switch, and differential switch models to meet your application needs.

Order Your Free Sample Switch »

FEATURES / BENEFITS

• Reliable performance under harsh / adverse conditions
• Larger diameter diaphragm / Conventional snap action
• Standard set point models: 0.07" H2O to 5.0" H2O
• Field adjustable set point models: 0.2" H2O to 5.0" H2O
• Multi-barb port connections standard: .250 in. and .375 in.
• Orifices, bleed holes and various mounting configurations available on all models
• Piggy-back design allows different snap-acting switches
• Lightweight, low cost
• Rigorously tested - Exceeds UL-508 / UL-353 Pilot Duty requirements
  (Tested hundreds of thousands of cycles)
• Silver contact points
• Different sized electric terminations available for same unit

SPECIFICATIONS
MECHANICAL
Standard Tolerance	Varies by set point - contact us
Switch Type	SPDT
Switching Medium	Air; compatible fluids
Mechanical Life	Tested hundreds of thousands of cycles Exceeds UL-508 / UL-353 Pilot Duty requirements
Proof Pressure	1.0 psi
Burst Pressure	3.5 psi
Operating Temp.	+40°F to +185°F
PHYSICAL
Case Material	Noryl® (PPO)
Porting Options	Multi-barb .250 in. and .375 in. (PS100) / .26 in. (PS160)
Diaphragm Material	Post-Cured Silicon
Contact Points	Silver
Electrical Connections	Terminals - .035"x.250" or .02"x.187" tab-type for use with quick disconnects
Mounting	PS100 Series: Vertical mount recommended PS160 Series: Variable position vertical mounting brackets available. Note: Always mount with diaphragm in vertical position unless otherwise specified
Weight	Less than 80 grams average (varies with snap switch / brackets)
ELECTRICAL
Current/Voltage Rating	5A 125/250 VAC Standard | 3A 125/250 AC | 1/10 HP 125/250 VAC .01A 125/250 VAC
Rated Standards	(UL 1054, EN 61058) | UL/VDE Approved MH29861 Related: UL 353, UL 508, BS EN 1854: 1997